SR50A-316SS-L Abstandssensor aus Edelstahl für Anwendungen im marinen Bereich
für marine Anwendungen
Korrosionsbeständiges Gehäuse und Transducer
wetter wasser energie gas flux and turbulence bauwerke boden

Überblick

Der SR50A-316SS ist eine Version des SR50A aus Edelstahl, die für marine Anwendungen geeignet ist. Der Sensor misst akustisch die Distanz zu einem Ziel und wird normalerweise genutzt, um Wassertiefe oder Schneehöhe zu bestimmen, kann aber auch für andere Aufgaben verwendet werden. Um ein genaue Messung zu erhalten, braucht man eine Referenztemperatur, um den Einfluss der Temperatur auf die Schallgeschwindigkeit zu kompensieren. Lesen Sie mehr

Funktionen und Vorteile

  • Rugged stainless-steel case protects piezoresistive sensor
  • Non-contact method for determining snow or water depth
  • Wide operating temperature range
  • Designed for marine or corrosive environments
  • User-selectable options for output
  • Uses a multiple echo processing algorithm to help ensure measurement reliability
  • Compatible with most Campbell Scientific data loggers

Bilder

An SR50A is shown. The SR50A and SR50A-316SS use the same chassis design and the same cabling.
An SR50A is shown. The SR50A and SR50A-316SS use the same chassis design and the same cabling.
An SR50A is shown. The SR50A and SR50A-316SS use the same chassis design and the same cabling.
Open-faced Parylene-coated transducer head used with the SR50A-316SS-L.<br />Notice that no mesh grill is used in front of the transducer head.
SR50A-316SS-L mounted to a 19517 SR50A Mounting Kit (sold separately)
SR50A-L mounted to a 19517<br />SR50A Mounting Kit and crossarm<br />(sold separately)
SR50A-L mounted to a<br />19484 SR50A Mounting Stem<br />(sold separately)
SR50A-L mounted to a crossarm using 19484 SR50A Mounting Stem and 17953 1 x 1 inch Nu-Rail crossover fitting (sold separately)

Technische Beschreibung

The SR50A-316SS was designed to meet the stringent requirements of measuring depths and uses a multiple echo processing algorithm to help ensure measurement reliability.

SDI-12, RS-232, and RS-485 output options are available for measuring the SR50A-316SS. Campbell Scientific’s MD485 interface can be used to connect one or more SR50A-316SS sensors in RS-485 mode to an RS-232 device. This can be useful for sensors that require lead lengths that exceed the limits of either RS-232 or SDI-12 communications. The SR50AH-L is available with a heater option for locations where rime ice is a problem.

The SR50A replaced the SR50 in March 2007. The newer SR50A is smaller and has different output options than its predecessor.

Spezifikationen

Measurement Time < 1.0 s
Output Options SDI-12 version 1.3, RS-232, RS-485 (output options selected by configuring internal jumpers)
Baud Rates 1200 to 38400 bps (RS-232, RS-485 modes)
Power Requirements 9 to 18 Vdc (typically powered by data logger’s 12 Vdc power supply)
Measurement Range 0.5 to 10 m (1.6 to 32.8 ft)
Beam Acceptance ~30°
Resolution 0.25 mm (0.01 in.)
Accuracy ±1 cm (0.4 in.) or 0.4% of distance to target (whichever is greatest). Requires external temperature compensation.
Operating Temperature Range -45° to +50°C
Compliance CE compliant
Length 10.1 cm (4.0 in.)
Diameter 7.5 cm (3 in.)
Weight 795 g (28 oz) without cable
Cable Weight 250 g (8.2 oz) for a 4.57-m (15-ft) cable

Maximum Cable Length
-NOTE- Cable lengths greater than 60 m require a heavier gage wire if the power supply drops below 11 Vdc.
SDI-12 60 m (200 ft)
RS-232 60 m (200 ft) Baud rates ≤ 9600 bps
RS-485 300 m (984 ft)

Power Consumption
Active 250 mA (typical)
Quiescent SDI-12 Mode < 1.0 mA
Quiescent RS-232/RS-485 Modes
  • < 1.25 mA (≤ 9600 bps)
  • < 2.0 mA (> 9600 bps)

Kompatibel mit

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Datenlogger

Product Compatible Note
CR1000 (retired) SDI-12 and RS-232. For RS-485, requires an MD485 interface or similar RS-485 to RS-232 interface.
CR1000X SDI-12 and RS-232. For RS-485, requires an MD485 interface or similar RS-485 to RS-232 interface.
CR200X (retired) SDI-12
CR216X (retired) SDI-12
CR300 (retired) SDI-12 and RS-232. For RS-485, requires an MD485 interface or similar RS-485 to RS-232 interface.
CR3000 SDI-12 and RS-232. For RS-485, requires an MD485 interface or similar RS-485 to RS-232 interface.
CR310 SDI-12 and RS-232. For RS-485, requires an MD485 interface or similar RS-485 to RS-232 interface.
CR5000 (retired) SDI-12 and RS-232. For RS-485, requires an MD485 interface or similar RS-485 to RS-232 interface.
CR6 SDI-12, RS-232, and RS-485
CR800 (retired) SDI-12 and RS-232. For RS-485, requires an MD485 interface or similar RS-485 to RS-232 interface.
CR850 (retired) SDI-12 and RS-232. For RS-485, requires an MD485 interface or similar RS-485 to RS-232 interface.
CR9000X (retired) SDI-12 and RS-232. For RS-485, requires an MD485 interface or similar RS-485 to RS-232 interface.

Miscellaneous

Product Compatible Note
GRANITE 6 SDI-12 and RS-232. For RS-485, requires an MD485 interface or similar RS-485 to RS-232 interface.

Additional Compatibility Information

Data Logger Considerations

One single-ended channel per probe is required; an excitation channel can be shared by several probes.