Field Displays / CR1000KD
CR1000KD Keyboard/Display for the CR1000, CR800, or CR6
Robust
leicht zu verwenden
nützlich im Feld
wetter wasser energie gas flux and turbulence bauwerke boden

Überblick

Das CR1000KD ist eine tragbare Anzeige mit Tastatur für die CR1000 und CR800 Datenlogger. Man kann damit den Status des Loggers überprüfen, sich gespeicherte Werte oder Momentanwerte eines Sensors anzeigen oder grafisch darstellen lassen. Außerdem kann man numerische Daten eingeben oder den Status eines Ports/einer Flag ändern. Ein CR1000KD kann zu mehreren Stationen mitgenommen werden. 

Lesen Sie mehr

Funktionen und Vorteile

  • Can be easily moved from data logger to data logger
  • Supports custom menus and displays to simplify routine operations

Bilder

Technische Beschreibung

The CR1000KD displays 8 lines x 21 characters (64 x 128 pixels) and has a 16-character keyboard. The CR1000KD is powered by the datalogger’s power supply. An SC12 connects the CR1000KD to the CR1000WP or CR800; the two connectors on the SC12 allow attachment of additional peripherals.

The CR1000KD supports custom menus. With custom menus, you can set up choices within the datalogger program that are initiated by a simple toggle or pick from a list in the menu displayed on the CR1000KD (for example, Initiate Sensor Calibration Sequence versus Bypass Sensor Calibration Sequence.)

There is not a CR1000KD Operator's Manual. Operation of the CR1000KD is described in the CR800 and CR1000 datalogger manual.

Spezifikationen

Temperature Range -20° to +50°C (operating)
Display/Keyboard Description 8 lines x 21 characters (64 x 1238 pixels) display and 16-character keyboard
Dimensions 10.2 x 15.2 x 1.5 cm (4.0 x 6.0 x 0.6 in.)
Weight 272 g (10 oz)

Current Drain
Quiescent Negligible
Active
  • 7 mA (without backlight)
  • 100 mA (with backlight)

Kompatibel mit

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Datenlogger

Product Compatible Note
CR1000 (retired)
CR1000X
CR200X (retired)
CR216X (retired)
CR300 (retired) The CR300-series dataloggers do not have the necessary CS I/O port required by the CR1000KD for connection to the data logger.
CR3000
CR310 The CR300-series dataloggers do not have the necessary CS I/O port required by the CR1000KD for connection to the data logger.
CR350 The CR350-series dataloggers do not have the necessary CS I/O port required by the CR1000KD for connection to the data logger.
CR5000 (retired)
CR6
CR800 (retired)
CR850 (retired)
CR9000X (retired)

FAQs für

Number of FAQs related to CR1000KD: 5

Alle anzeigenWenige anzeigen

  1. Is it possible to use the CR1000KD to connect to remote RF stations using an RF modem and a radio?

    No. The CR1000KD is designed specifically for use on the CS I/O port of the CR800, CR1000, and CR6 dataloggers. 

  2. Can the constants located within the ConstTable/EndConstTable instructions be edited?

    Yes. After a ConstTable is declared in a program, it can be accessed using the CR850 or CR1000KD keypad display and the standard/default datalogger menu. It appears under Configure | Settings. 

  3. Are custom menus displayed on the terminal interface?

    CustomMenu instructions apply to the CR1000KD, CR850, and CR3000 display. Custom menus are not displayed or passed through to the terminal interface. 

  4. Is there a way to allow a user to change constants in a CR800, CR1000, CR3000, or CR6 program without allowing the user to make other program changes?

    In OS 24 (CR6 OS 01) and later, a user can change constants from the CR1000KD or a terminal emulator without touching the program. The program must contain a ConstTable/EndConstTable construction for this to occur. Because the program does recompile, collect the data first.

  5. Are the CR800 and CR1000 capable of being programmed through a CD100 or CR1000KD without the use of computer software?

    Although it is recommended to use software such as Short Cut for programming, the CR800-series, CR1000, and CR3000 dataloggers can be programmed with the CD100, CR1000KD, or integrated keypads. The keypad can be used to create new programs or edit programs that already exist in the data logger memory.

    From the CD100 or CR1000KD home screen, follow these steps to get started:

    1. Press Enter. 
    2. Select File and press Enter. 
    3. Select either New or Edit. 
      • To modify an existing instruction, select the instruction, and press Enter. 
      • To add a new instruction, press Ins, and select Instruction.
Gehen Sie zumVerzeichnis der FAQs