Das SC-CPI ist ein Interface zur Verbindung eines CR800/CR1000/CR3000 Datenloggers von Campbell Scientific mit einem der neuen CDM (Campbell distributed interface) - Module. Die CDMs verwenden das neue CAN Peripherieinterface (CPI) und das SC-CPI ermöglicht eine Verbindung über die SDM-Ports der oben genannten Logger und ermöglicht die Nutzung der CPI-Module. Zukünftige Logger haben einen CPI-Port eingebaut.
Temperature Range |
|
Current Drain | 50 mA (active) |
Dimensions | 15.94 x 7.49 x 3.18 cm (6.28 x 2.95 x 1.25 in.) including ground lug |
Weight | 0.188 kg (0.415 lb) |
Connectors |
|
CPI | RJ45 |
Serial Connect to Data Logger | Screw terminal |
Computer Configuration via Device Configuration Utility | USB |
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Product | Compatible | Note |
---|---|---|
CR1000 (retired) | ||
CR200X (retired) | ||
CR216X (retired) | ||
CR3000 | ||
CR800 (retired) | ||
CR850 (retired) | ||
CR9000X (retired) |
A 5-conductor cable connects the data logger to the SC-CPI, and an Ethernet cable connects the SC-CPI to the CDM.
The data logger operating system must be version OS 26.
Number of FAQs related to SC-CPI: 2
To communicate with CDM devices using the CPI protocol, the CR3000, CR1000, CR850, and CR800 dataloggers require an SC-CPI device. Only one SC-CPI device per datalogger is required. It is expected that the design of future Campbell Scientific datalogger products will work with CPI-based modules directly.