Standardgehäuse / ENC14/16
ENC14/16 Weather-Resistant Enclosure, 14 x 16 inches
Robust und vielseitig
Komponenten von Campbell können einfach und schnell montiert werden
wetter wasser energie gas flux and turbulence bauwerke boden

Überblick

Das Enc14/16 ist ein wetterfestes Gehäuse, 35,6cm breit und 40,6 cm hoch. Es  kann Datenlogger, Stromversorgung und ein oder mehrere Periepheriegeräte aufnehmen, je nach deren Größe. Das Enc14/16 wird gern eingesetzt, um z.B. am Bein eines CM110, CM115 oder CM120 befestigt zu werden, wo das große Enc16/18 nicht hin passt.

Lesen Sie mehr

Funktionen und Vorteile

  • Wasserdicht zum Schutz der Instrumente
  • Rückwand so ausgelegt, dass Komponenten von Campbell Scientific leicht und sicher montiert werden können
  • Weisse, UV-stabile Gehäuse reflektieren die Sonnenstrahlen und reduzieren so Temperaturgradienten im Gehäuse ohne dass ein weiterer Strahlungsschutz nötig ist

Bilder

3D/CAD-Dateien:

Technische Beschreibung

The ENC14/16's backplate is prepunched with one-inch-on-center holes suitable for attaching a datalogger, power supply, and a communications or measurement and control peripheral.

Spezifikationen

Color White (Reflects solar radiation, reducing temperature gradients inside the enclosure without requiring a separate radiation shield.)
Construction Fiberglass-reinforced polyester enclosure with door gasket, external grounding lug, stainless-steel hinge, and lockable hasps
Enclosure Classification NEMA 4X (before being modified for cable entry)
Number of Cable-Entry Seals 2 large, 2 medium, 2 small
Dimensions
  • 40.6 x 35.6 x 14 cm (16 x 14 x 5.5 in.) internal
  • 38.63 x 33.66 x 17.6 cm (15.21 x 13.25 x 6.93 in.) internal under the lid space
  • 44.27 x 39.19 x 19.58 cm (17.43 x 15.43 x 7.71 in.) external
Weight 6 kg (13 lb)

Kompatibel mit

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Datenlogger

Product Compatible Note
CR1000 (retired)
CR200X (retired)
CR216X (retired)
CR300 (retired)
CR3000
CR350
CR5000 (retired)
CR6
CR800 (retired)
CR850 (retired)
CR9000X (retired)

FAQs für

Number of FAQs related to ENC14/16: 16

Alle anzeigenWenige anzeigen

  1. What can be done if an enclosure gasket becomes torn or damaged?

    If you purchased a Stahlin enclosure from Campbell Scientific and it has a failed gasket, we can help you. We will need you to provide an image of the failed gasket, verify the size of your enclosure, and provide your contact information. We can then arrange to have a replacement gasket sent to you from Stahlin. For assistance, contact Technical Support at 435.227.9100.

  2. What are the distances, center-to-center, of the mounting holes in the back of the ENC14/16?
    12 inches.
  3. What are the weight and internal dimensions of the ENC14/16?
    The ENC14/16 weighs 13 lb. Its internal dimensions are 14 x 16 x 5.5 in.
  4. Is a fiberglass enclosure suitable for an installation in a very cold location monitoring corrosion?
    Our fiberglass enclosures can withstand very cold locations, and their fiberglass/plastic construction is very resistant to corrosion.
  5. If the copper ground terminals attached to the bottom of an enclosure are oxidized and corroded, how can they be replaced?
    The terminals do not need to be replaced. Just sand or file the corrosion away, exposing clean copper, and the fittings will continue to be functional.
  6. How many mounting accessories should be ordered for each major device inside an enclosure?
    It depends on the device. Most devices have built-in mounting flanges, but some items require a separate mounting bracket.
  7. If the PVC fittings at the bottom of the enclosure have too small an inner diameter to accommodate all the cables passing through, is there a way to remove the PVC fittings?
    Unscrew the PVC fittings to remove them.
  8. How can a loose gasket on an enclosure be fixed?

    The following information is applicable to many of Campbell Scientific’s standard enclosures and prewired enclosures.

    Note: The procedure below will not work for torn or damaged seals.

    To make a field repair to a loose gasket on an enclosure, first acquire an adhesive, such as standard Gorilla Glue, that is rated for use with polyurethane foam. The adhesive should be compatible with, and recommended for, use with polyurethane foam. Follow these steps:

    1. Pull the gasket away from the gasket channel, being careful not to tear the gasket. The gasket does not need to be removed completely. Rather, remove only those areas that have pulled loose on their own. To keep the gasket up out of the way, lay a small object (such as a toothpick, pen, or pencil) horizontally across the channel.
    2. Using an adhesive that is rated for use with polyurethane foam, apply a small bead of adhesive to the gasket channel. Because the adhesive’s only function is to keep the gasket in place, use it sparingly.
    3. Remove any objects that were holding the gasket out of the way.
    4. Carefully place the gasket in the gasket channel.
    5. Wait 1 to 3 hours for the adhesive to cure before closing the door.
  9. Does the enclosure have a mounting bracket inside to mount the datalogger?
    Yes. Each enclosure Campbell Scientific sells has a powder-coated backplate with holes on 1 in. centers that match the mounting flanges on our equipment for easy mounting.
  10. What sizes do backplates come in?

    Backplates are available in sizes designed to fit in Campbell Scientific enclosures: 10 x 12 in., 12 x 14 in., 14 x 16 in., and 16 x 18 in.

Gehen Sie zumVerzeichnis der FAQs

Anwendungsbeispiele

district of columbia: solar decathlon
District of Columbia: Solar Decathlon
The Solar Decathlon takes place every other year on the National Mall in Washington, D.C.......lesen Sie mehr
Alle Projektberichte ansehen