Überblick
Der CS658 ist ein Wassergehalt-Sensor zur Verwendung mit dem Hydrosense II-System. Er verwendet 12cm-Stäbe, der CS659 dagegen 20cm-Stäbe. Die Stäbe können nicht zwischen den Sensoren ausgetauscht werden.
Lesen Sie mehrBilder
Technische Beschreibung
The CS659 soil moisture probe has been designed to aid insertion into and removal from hard soils. The probe rods use ferrule nuts to secure the rods to the probe housing. A molded plastic grip connects the probe's cable to its housing.
Spezifikationen
| Volumetric Water Content Accuracy | 3% typical (solution electrical conductivity < 6.5 dS/m) |
| Volumetric Water Content Resolution | < 0.05% |
| Volumetric Water Content Range | 0% to 50% VWC |
| Cable | Spiral, 250 cm (98 in.) extended |
| Cable Length | 1.524 m (5 ft) when coiled |
| Ingress Protection Rating | IP68 |
| Rod Diameter | 5 mm (0.14 in.) |
| Rod Length | 120 mm (4.7 in.) |
| Body Dimensions | 100 x 92 x 40 mm (3.9 x 3.6 x 1.6 in.) |
| Weight | 450 g (15.9 oz) |
Kompatibel mit
The CS659 is used with the Hydrosense II soil content system only. (The CS659 is designed for use with the HS2 but not with the HS2P.) The rods of the CS659 and CS658 are not interchangeable.
Dokumente
Übereinstimmung mit Richtlinien u. Vorschriften
FAQs für
Number of FAQs related to CS659: 4
Alle anzeigenWenige anzeigen
-
-
-
Because of the thread type used for the two sensors/rods, it is physically impossible to interchange the rods.
- The 20 cm rods used with the CS658 are not compatible with the CS659.
- The 12 cm rods used with the CS659 are not compatible with the CS658.
If measurements are needed for both depths, both the CS658 and CS659 must be used.