FAQs Häufige Fragen an uns

Fragen dazu Fragen dazu

All FAQs (1768 total: showing 1641-1660)

Can more than one SDM device be connected to a datalogger?
Can Campbell Scientific dataloggers be used with a telemetry system to remotely download data, check parameters, etc.?
Can binary data be received via the serial terminal of a datalogger?
What might cause a CRBasic datalogger to stop storing data?
How can the amount of time before the memory of a datalogger is filled be calculated?
What are the rules regarding when data is deleted from a datalogger?
What is a USR drive?
What needs to be done to get a CR3000 program to run on a CR9000 or CR9000X?
If a CR3000, CR1000, CR800, or CR850 has TLS enabled and connects to a server whose certificate is not verified by a “trusted” signer, what will the datalogger do?
If a CR3000, CR1000, or CR800-series datalogger has a “machine self-calibration failed” message, what does that mean?
Can CR3000, CR1000, CR800, or CR850 digital terminals be configured to act as RS-232 terminals?
Do the CR800-series, CR1000, and CR3000 dataloggers have 50 Hz versions?
What is the best way to download data simultaneously from a remote CR1000 and CR3000 via a cellular modem?
Can the collected data on a CR3000 or CR5000 be relayed to a display panel via a voltage or 4 to 20 mA signal?
Can communication be established between a computer and a CR3000, CR1000, CR800, or CR850 datalogger in a Wi-Fi network environment?
How can multiple CR3000, CR800-series, or CR1000 dataloggers be connected together?
Can an iPhone be used to load programs from a computer to a CR3000, CR1000, or CR800-series datalogger?
Can a CR1000 be directly connected as a peripheral device to a CR3000 via a serial connection?
Can the data structure on a CR3000 or CR1000 be downloaded?
How can a CR1000 and CR3000 be networked together?

Vorhergehendes Nächstes