41303-5A 6-Plate Solar Radiation Shield
klein und kompakt
schützt und beschattet Sensoren
wetter wasser energie gas flux and turbulence bauwerke boden

Überblick

Der 41303-5A ist ein natürlich belüfteter Strahlungsschutz mit 6 Platten. Sein Aufbau ermöglicht es der Luft, durch den Schutz zu streichen und damit den Sensor sehr nah an der Umgebungstemperatur zu halten. Die weisse Farbe reflektiert die Sonneneinstrahlung.

Lesen Sie mehr

Funktionen und Vorteile

  • Naturally shades and protects the sensor
  • Mounts directly to Campbell Scientific tripods and towers
  • Used with HMP60, CS215, 107, 108, 109, HMP50, or CS500 probes

Bilder

Technische Beschreibung

The 41303-5A houses one 107, 108, 109, CS215, or HMP60 probe. The probe fits in the bottom of the shield and is held into place with screws.

The 41303-5A includes a 2-in. u-bolt with a plastic v-block. The u-bolt is placed in the holes on the side of the bracket for attachment to a mast or vertical pole. The u-bolt is placed in the holes on the bottom of the bracket for attachment to a crossarm.

The 41303-5A replaced the 41301 in 2005. The biggest improvement of the 41301 is that it can be mounted to either a vertical pole or horizontal pipe. The retired 41301 only mounted to a vertical pole.

 

Spezifikationen

Construction UV-stabilized white thermoplastic plates, aluminum mounting bracket, white powder-coated stainless-steel U-bolt clamp
Plate Diameter 11.9 cm (4.7 in.)
Height 11.4 cm (4.5 in.)
Weight 408 g (0.9 lb)

Kompatibel mit

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Sensors

Product Compatible Note
107
108
109
43347
CS215-L (retired)
HC2S3 (retired)
HMP155A-L
HMP45C-L (retired)
HMP50-L (retired)
HMP60

Additional Compatibility Information

The 41303-5A attaches to a crossarm, mast, or user-supplied pipe with a 1.0 to 2.1 in. OD.

FAQs für

Number of FAQs related to 41303-5A: 2

  1. Can the 41303-5A 6-plate radiation shield or the 41003-5 10-plate radiation shield be used with the HMP155A-L?

    No. The HMP155A-L requires the 41005-5 14-Plate Solar Radiation Shield.

  2. Which radiation shield model should be used with the HC2S3-L?

    To measure ambient temperature and relative humidity (RH), mount the HC2S3-L probe inside a 41003-5 or 41003-5A 10-Plate Radiation Shield. The 27731 hex plug is shipped with the HC2S3-L so that it can be used with older 10-plate radiation shield models. The 6-plate radiation shield (pn 41303-5A) cannot be used with the HC2S3-L.

Gehen Sie zumVerzeichnis der FAQs