RETIRED ›
This product is no longer available and has been replaced by: 38476. Some accessories, replacement parts, or services may still be available.
009642 8 GB microSD Flash SLC Memory Card
Services Available

Überblick

The 33288, manufactured by ATP Electronics, Inc., is an 8 GB microSD flash-memory card. This card is designed for use in harsh conditions often presented by environmental and industrial applications. The card uses single-level cell (SLC) memory, which aids in its ability to operate over wide temperature ranges, consume less power, and provide a reliable data-storage medium through more read-write cycles.

Lesen Sie mehr

Funktionen und Vorteile

  • High-endurance and high-performance SLC NAND flash
  • Ruggedized for industrial environments
  • Advanced firmware features for data integrity in industrial environments
  • Advanced flash management for device reliability

Bilder

(Image provided by ATP Electronics, Inc.)
(Image provided by ATP Electronics, Inc.)

Technische Beschreibung

The 33288 is an 8 GB SLC microSD card designed for the rugged conditions of industrial and other demanding applications—including solar radiation applications. The card has a water and dust ingress protection rating of IP57 (IEC 60529). The 33288 has been subjected to testing for ESD, shock and vibration, salt atmosphere endurance, and bend and torque.

The advanced firmware of the 33288 card ensures the integrity of stored data in industrial environments. Two of these features are AutoRefresh and Autoscan.

The advanced flash management system of the 33288 ensures device reliability through advanced wear-leveling algorithms and bad-block management.

For more information about SLC microSD cards and their benefits, review the FAQ.

Spezifikationen

Card Type microSD, industrial
Storage Capacity 8 GB
Memory Type single-level cell (SLC)
Operating Temperature Range -40° to +85°C
Waterproof IEC 60529 Edition 2.1: 2001-02—IPX7 (below 1000 mm water, 30 min)
Dustproof IEC 60529 Edition 2.1: 2001-02—IP5X
ESD Resistance (IEC 61000-4-2)
  • Contact pad ±4 kV
  • Non-contact pad ±8 kV (coupling plane discharge)
  • Non-contact pad ±15 kV (air discharge)
Endurance 60 K P/E cycles per block (Advanced Dynamic/Static Wear Leveling algorithm)
Mean Time Between Failures (MTBF) > 5,000,000 hours (@ 25°C) as reported by manufacturer
Data Retention (@ 55°C use condition)
  • 5 years (≦ 6,000 P/E cycles used)
  • 1 year (＞ 6,000 to ～60,000 P/E cycles used)
Length 15 mm ±0.1 mm (~0.59 in.)
Width 11 mm ±0.1 mm (~0.43 in.)
Thickness 1.0 mm ±0.1 mm (~0.04 in.)
Weight 0.4 g (0.014 oz)

Kompatibel mit

Our CR6 and CR1000X dataloggers accept microSD cards.

FAQs für

Number of FAQs related to 009642: 1

  1. What is the difference between the microSD cards that Campbell Scientific sells and the cards that are commonly used in the consumer electronics at home?

    Campbell Scientific sells, and embeds in their products, microSD cards that have single-level cell (SLC) memory. In contrast, many electronics retailers sell microSD cards that have multi-level cell (MLC) memory. The difference between these two types of memory is significant.

    • The SLC microSD cards from Campbell Scientific are better suited for industrial and environmental applications where wide operating temperatures, low power consumption, and longevity are very important. Most SLC memory cards are designed with industrial applications in mind and, therefore, often have additional perks such as enhanced protection from ESD (electrostatic discharge) and mechanical damage.
    • The MLC microSD cards commonly available at electronics retailers are less expensive, but they are generally not well suited for the majority of applications in which Campbell Scientific data acquisition products are used.
Gehen Sie zumVerzeichnis der FAQs