This product is no longer available. Some accessories, replacement parts, or services may still be available.
| Services Available | |
|---|---|
| Repair | No |
| Free Support | Yes |
Überblick
Das RF500M ist ein vielseitiges Funkmodem für PakBus und ALERT Netzwerke mit UHF/VHF Modems. Es kann als Feldmodem an einem Pakbus Datenlogger eingesetzt werden, als selbstständiger Repeater ohne Logger oder am PC als Modem der Basisstation. Das Funkmodem ist kompatibel mit den Modems der RF310-Serie , der RF300er Serie oder jeder Funkgerät und Modem kombination die eine demodulierte Bytekette über RS232 ausgibt.
Für Neuinstallationen empfehlen wir eins der spread-spectrum Funkmodens .
Lesen Sie mehrFunktionen und Vorteile
- Supports multiple radio configurations
- Uses software (DevConfig) instead of hardware modifications to upgrade the operating system (OS) and change RF ID or other settings
- Provides an RS-232 port (DTE) for modem configuration or attachment of an RS-232 radio
- Avoids all collisions within a network, thus increasing polling speeds and reducing overall current drain
Bilder
Zugehörige Produkte
Technische Beschreibung
The RF500M serves as a remote, repeater, and base station communication interface, generally for our licensed radio applications. It provides an interface between a datalogger or computer and a radio and can be a stand-alone repeater when onsite logging is not required. The RF500M is powered from the CS I/O port or from an external power connection. This modem is software configurable, and has been designed to interface with data telemetry radios such as our RF320-, RF310-, and RF300-series VHF/UHF radios.
-PB Operating System
The RF500M's -PB operating system was designed to quickly and efficiently move data through a network, making it a perfect choice for large networks or networks requiring fast collection intervals.
The time division polling (TD-RF) nature of the network provides collision free communications as the base modem controls when and how all data moves. An area wide poll releases station-originated data, with each station having its own dynamically allocated slot in which to transmit. The data is collected and moved through the network back to the base. Two-way communications allow each station to be remotely administered (send program, change variables, etc.) from the base. Station-to-station communications are possible using PakBus; however communications occur on the poll and must be routed though the LoggerNet server.
-DA Operating System
The -DA operating system enables each station to be dialled from anywhere in the network, at any time. This ability supports masterless point-to-point communications.
-AL Operating System
The ALERT (Automated Local Evaluation in Real Time) operating system (OS) allows for transmission, repeating, and reception of binary ALERT formatted data. Additionally, it is a derivative of the -PB OS, and therefore supports both ALERT and TDRF communications (allowing true two-way communication with a station).
When used as an ALERT transmitter, the RF500M accepts an array of ALERT ID/Value pairs allowing multipacket transmissions. It can also turn any station into a store-and-forward ALERT repeater with programmable pass/reject lists. With the ability to transmit, receive, decode, and repeat ALERT data, the RF500M and datalogger allow for the creation of standard and advanced ALERT network components including:
- Transmitters
- Repeaters with sensor inputs
- Store-and-forward repeaters
- Multifrequency repeaters
- Data concentrators
- Robust high traffic base stations
Spezifikationen
| Voltage | 7 to 20 Vdc (Can be provided by the CS I/O port.) |
| Active Current Drain | < 8 mA RMS (@ 12 Vdc) |
| Temperature Response | -25° to +50°C (standard) |
| Temperature Range | -55° to +85°C (extended) |
| Dimensions | 16.0 x 9.5 x 2.2 cm (6.31 x 3.69 x 0.88 in.) |
| Weight | 0.18 kg (0.4 lb) |
Transceiver Audio Output (pin 5) |
|
| J1 Jumper Configuration | 310 mV peak-to-peak (Campbell Scientific adjusts the audio input gain so that it is compatible with J1.) |
| J3 Jumper Configuration | 670 mV peak-to-peak |
Kompatibel mit
Data Logger Considerations
Time division polling and PakBus communications can be used in the same network as long as all of the data loggers are PakBus versions.
Compatible Contemporary Data Loggers
| RF500M OS | CR200(X) Series | CR800/ CR850 |
CR1000 | CR3000 | CR6 | CR9000X | CR300 Series |
| -PB | # |  |
|
|
** | # | |
| -DA | |
|
|
||||
| -AL | |
|
|
|
|
|
Compatible Retired Data Loggers
| RF500M OS | CR 500 |
CR 510 |
CR 10 |
CR 10T |
CR 10X |
21X | CR 23X |
CR 9000 |
CR 5000 |
CR 7X |
| -PB | ‡ | |
‡ | ‡ | ||||||
| -DA |  |
♣ | |
♣ | |
♣ | |
|||
| -AL |
Notes:
#The RF500M cannot be a repeater while the modem is connected to a CR200(X) or CR300-series datalogger.
**The RF500M is only compatible with the CR6 when using -PB OS version 3 or later.
‡The -PB OS option for the RF500M is only compatible with the -PB and -TD OS for the CR510, CR10X, and CR23X.
♣The -DA OS option for the RF500M is NOT compatible with the -TD OS option for the CR510, CR10X, and CR23X.
Radios
Three jumper settings allow the RF500M to be used with a variety of radios. Though not a requirement, it is a good idea to standardize your network to use a single radio type. This practice simplifies operations and maintenance and provides the highest degree of interstation compatibility possible.
| RF320 Series | RF310 Series | RF300 Series | Calamp DataRadio DL-3400 |
Digital/ RS-232 Radio |
RF200 | RF100 |
|
|
|
|
† |
Note:
†The RF500M must have the -PB OS option to use a digital RS-232 radio with it.
Radio Modems and Radio Base Stations
Networks can contain a mixture of RF500M modems and other Campbell Scientific radio modems and base stations assuming they have compatible operating systems (see chart below).
| Modem/ Base Station |
-PB OS | -DA OS | -AL OS | |
| RF500M | -PB | |
* | |
| -DA | |
|||
| -AL | |
|||
| RF500B | -PB | |
* | |
| -DA | |
|||
| -AL | |
|||
| RF310M | -TD | |
* | |
| -MA | |
|||
| -AL | |
|||
| RF310B | -TD | |
* | |
| -MA | |
|||
| -AL | |
|||
| RF315M | -TD | |
* | |
| -MA | |
|||
| -AL | |
|||
| RF95A | -TD | |
* | |
| -MA | |
|||
| -AL | |
|||
| RF232A | -TD | |
* | |
| -MA | |
|||
| -AL | |
|||
Notes:
* When taking advantage of TDRF and two-way communication.
Dokumente
Broschüren Produkte
Handbücher
Übereinstimmung mit Richtlinien u. Vorschriften
Downloads
RF500M ALERT OS v.02 (770 KB) 04-01-2012
Execution of this download copies the ALERT Operating System (-AL) for the RF500M onto your computer. The ALERT (Automated Local Evaluation in Real Time) OS allows for transmission, repeating, and reception of binary ALERT formatted data. This OS is compatible with the CR200(X) series, CR800 series, CR1000, and CR3000.
Note: Requires Device Configuration Utility 2.01 or newer.
RF500M DIAL OS v.01 (714 KB) 27-02-2012
Execution of this download copies the Dial Operating System (-DA) for
the RF500M onto your computer. The dial OS works with both mixed-array
and PakBus/Table based loggers with the exception of the CR200(X);
only the CS I/O port of the modem is used for data transfer. Each
station can be a point-to-point node and repeater and can be dialed by
LoggerNet for data transfer and remote administration.
Note: Requires Device Configuration Utility 2.01 or newer.
RF500M OS v.04 (492 KB) 04-02-2016
Execution of this download copies the PakBus Operating System (-PB) for the RF500M onto your computer. The -PB OS uses TD-RF polling to quickly and efficiently move data through a network. Additionally, each station can be individually dialed by LoggerNet. This OS is compatible with -TD, -PB, and our current generation of PakBus dataloggers.
Note: Requires Device Configuration Utility 2.01 or newer.
FAQs für
Number of FAQs related to RF500M: 7
Alle anzeigenWenige anzeigen
-
Yes. When the RF500M is powered up (or whenever the internal processor is reset), each of the LED indicators on the modem will illuminate, cycle through a series of colors, and turn off. This is an indication that the RF500M is running the Power On Self-Test (POST). If the LEDs remain illuminated, this is an indication that the POST has failed.
-
Usually, yes. Contact Campbell Scientific for a return material authorization number (RMA) and instructions for returning the unit for repair. Additional information is available on the Repair and Calibration page.
-
The RF500M Radio Modem is warranted by Campbell Scientific, Inc., to be free from defects in materials and workmanship under normal use and service for twelve (12) months from date of shipment unless specified otherwise.
-
No. The RF500M cannot be directly interfaced with a GPS receiver. However, most Campbell Scientific data loggers can be interfaced with the output from a GPS receiver and programmed to extract the positional information. This information can then be accessed via an RF500M/RF320 RF link.
-
Engineering drawings, in general, are not made accessible to the public. For a specific question, contact Campbell Scientific for assistance.
-
No. The CR1000KD is designed specifically for use on the CS I/O port of the CR800, CR1000, and CR6 dataloggers.
-
If the RF modem has a CS I/O connector, then it should be compatible with the CR10X without the use of an SC932A. Ensure that the RF modem’s firmware is compatible with the CR10X firmware.
Note: RF modems that are not sold by Campbell Scientific will only interface with a CR10X via an SC932A or an SC105.
Anwendungsbeispiele
The Charlotte-Mecklenburg Flood Information and Notification System (FINS) consists of over 125 gaging stations spread......lesen Sie mehr
In the late 1970s, the National Weather Service implemented the Integrated Flood Observing and Warning......lesen Sie mehr
The Oklahoma Mesonet is a statewide environmental monitoring network developed through the cooperative efforts of......lesen Sie mehr