erfüllt IEC 61724-1 Vorgaben
Überblick
Der MetSENS600 ist ein kompakter Wettersensor zur von Windgeschwindigkeit und -richtung über Ultraschall, Lufttemperatur, relative Luftfeuchte und Luftdruck. Die Sensorelemente befinden sich in einem Strahlungsschutz und es gibt keine beweglichen Teile. Ein Kompass ist integriert. Über einen optisches Element werden auch geringe Mengen Niederschlag detektiert. Als Daten können Temperatur, relative und absolute Luftfeuchte, Luftdruck, Luftdichte und Feuchtkugeltemperatur, dazu Niederschlagsmenge und -intensität ausgegeben werden, außerdem durchschnittliche Windgeschwindigkeit nach WMO, Windrichtung und Böen. Der MetSENS600 kann SDI-12, RS485, ModbusRS-485 oder NMEA RS-232 ausgeben und ist damit kompatibel mit der MeteoPV Solar Resource Platform und allen neueren Campbell Datenlogger über SDI-12, RS-485, ModbusRS-485 oder NMEA RS-232.
Funktionen und Vorteile
- Hochwertige Messungen
- Schnell und einfach zu installieren
- Kompaktes design
- Leicht und robust
Bilder
Zugehörige Produkte
Spezifikationen
| Measurements Made | Air temperature, barometric pressure, precipitation, relative humidity, wind direction, and wind speed. |
| Sampling Rate | 1 Hz |
| Digital Communication Modes | Serial RS-232, RS-485, SDI-12, NMEA, Modbus, ASCII |
| IP Rating | 66 |
| Compliance |
|
| Operating Temperature Range | -40° to +70°C |
| Operating Voltage | 5 to 30 Vdc |
| Typical Current Drain @ 12 Vdc |
|
| Weight | 0.8 kg (1.8 lb) |
Air Temperature Measurement |
|
| Measurement Range | -40° to +70°C |
| Resolution | 0.1°C |
| Accuracy | ±0.3°C (@ 20°C) |
Relative Humidity Measurement |
|
| Measurement Range | 0 to 100% |
| Resolution | 0.1 |
| Accuracy | ±2% @ 20°C (10 to 90% RH) |
Barometric Pressure Measurement |
|
| Measurement Range | 300 to 1100 hPa |
| Resolution | 0.1 hPa |
| Accuracy | ±0.5 hPa (@ 25°C) |
Wind Speed Measurement |
|
| Measurement Range | 0.01 to 60 m s-1 |
| Accuracy |
|
| Resolution | 0.01 m s-1 |
| Starting Threshold | 0.01 m s-1 |
Wind Direction Measurement |
|
| Measurement Range | 0° to 359° |
| Accuracy | ±3° (up to 60 m s-1) |
| Resolution | 1° |
Precipitation Measurement |
|
| Measurement Type | Optical |
| Measurement Range | 0 to > 300 mm h-1 |
| Precipitation Resolution | 0.08 mm |
| Repeatability | 3% |
Compass |
|
| Measurement Range | 0 to 359° |
| Resolution | 1° |
| Units of Measure | Degrees |
| Accuracy | ±3° |
Dokumente
Broschüren Produkte
Handbücher
Technische Artikel
Downloads
MetSens600 Example Programs v.1 (5 KB) 25-09-2019
Three CR1000X data logger programs that read the MetSens600 measurements and sensor status. An example program is included for each output option (RS-232, Modbus, SDI-12).
FAQs für
Number of FAQs related to METSENS600: 1
-
- MetSENS has a compass module that outputs at 1 Hz real time without affecting any other measurements, which allows the correction of wind direction if the station is installed on moving ice.
- MetSENS has a two-year service life, which is especially helped by the use of a double-louvered radiation shield to reduce the flow of contaminants getting to the temperature/humidity probe.
- MetSENS has an option for GPS.
- MetSENS has a wind speed resolution of 0.01 m/s, whereas most all-weather sensors have a resolution of 0.1 m/s.
- MetSENS has a dew point accuracy of ± 0.3°C, whereas most all-weather sensors have an accuracy of > ±0.7°C.
- MetSENS temperature resolution is for the full-range temperature at 0.1°C, whereas other all-weather sensors change to 0.2° at the extremes.
- MetSENS offers users the option to use any industry-standard tipping bucket rain gage (MetSENS550).
- MetSENS provides RS-232, RS-485, Modbus, and SDI-12 from all models.
- MetSENS uses Intelligent Signal Processing (ISP) and Adaptive Gain Control (AGC), which have been proven worldwide to provide good quality data.
- MetSENS does not indicate a drop in wind speed if the temperature drops or if rain occurs, whereas this is fairly common in other all-weather sensors.