Strahlungssensoren / CS325DM-L
CS325DM-L Silicon Irradiance Reference Sensor

Überblick

Der CS325DM, hergestellt von IMT Solar alsSi-RS485TC-T, wird normaleweise als Referenzzelle bei der Überwachung von PV-Anlagen verwendet. Das Sensorelement wurde entworfen um einem PV-Modul zu ähneln, vor allem in der Spektralantwort. Datenausgabe erfolgt über Modbus RTU RS-485. Campbell Scientific baut einen Stecker am Sensor an, der es ermöglicht, das Kabel im Feld einfach zu ersetzten.

Funktionen und Vorteile

  • Robust, geeignet für weiten Temperaturbereich
  • Analoge und/oder digitale Ausgabe verfügbar
  • Spektrale Empfindlichkeit und Änderung beim Einfallswinkel korrespondieren mit kristallinen PV Modulen
  • Eingebaute Messung der Zell-Temperatur und Signal-Anpassung

Bilder

Zugehörige Produkte

cmp3-l pyranometer
CMP3-L Pyranometer

Spezifikationen

Sensor Silicon solar irradiation sensor
Measurement Description Solar irradiance measurements for outdoor monitoring of PV systems
Irradiance Measurement Range 0 to 1500 W/m2
Operating Temperature Range -35° to +80°C
Input Power 8 to 28 Vdc (12 to 28 Vdc for 0 to 10 V analog output)
Photovoltaic Cell Crystalline Si, 20 mm x 20 mm, ~135 mA @ 1 sun
Window Low-iron solar glass, or CdTe-matching filter
Cell Temperature Measurement -40° to +100°C, Pt100 RTD
Calibration Data Internally calibrated; no calibration data to manage
Enclosure Material Powder-coated cast aluminum housing
IP Rating IP67
Cable Type Shielded, weather-resistant, UV-rated, 24 AWG/0.2 mm2
Cable Connector M12 circular connector, IP67
Response Time 0.15 s
Electronics Non-Linearity ±0.03% of range
Repeatability ±0.02% of range
Temperature Drift ±0.4% at 1000 W/m2 (-35° to +80°C)
Factory Calibration of Electronics ±0.1% of reading ±0.2% of range
Irradiance Calibration ±1.8% (calibrated to NREL-traceable reference standard)
Overall Measurement Uncertainty ±2.0% of reading ±4 W/m2
Stability 0.5% per year
Mounting 4 mounting holes with diameter 5.50 mm (0.217 in.)
Dimensions 115.1 x 65.0 x 30.0 mm (4.53 x 2.56 x 1.18 in.)
Weight 0.3 kg (0.6 lb)

Digital
Communications Protocols Modbus over RS-485, user-settable Modbus address
Baud Rate Up to 57.6 kbps
Current Consumption Typically 8 to 15 mA

Analog
Analog Output Options
  • 0 to 1.5 V
  • 0 to 10 V
  • 4 to 20 mA
Analog Output Signals
  • Irradiance
  • Cell temperature
  • Short-circuit current
Current Consumption
  • Typically 8 to 15 mA (0 to 1.5 V or 0 to 10 V mode)
  • 15 to 55 mA (4 to 20 mA mode)
Output Impedance 2 kohm (0 to 1.5 V or 0 to 10 V mode)
Internal Voltage Drop Allow 3.5 V minimum (4 to 20 mA mode)

Kompatibel mit

The CS325DM requires an RS-485 adapter if the data logger it is being used with does not support RS-485.

Downloads

CS325DM Program Examples v.2 (3 KB) 11-01-2022

Two CR1000X data logger programs that read the CS325DM measurements. An example program is included for each output option (digital Modbus, analog). Program code for other data logger models will be similar. 

Aufgelistet unter

Common Accessory for the following products: