Provides additional ports with automatic zero and span
Überblick
Das CPEC310 ist ein schlüsselfertiges closed-path Eddy-Covariance (EC) System zum Langezeit-Monitoring der Flüsse von Kohlendioxid, Wasserdampf, Wärme und Impuls. Ein komplettes System besteht aus dem closed-path Gasanalytor (EC155 closed-path gas analyzer), 3D-Ultraschallanemometer (CSAT3A ), Datenlogger (CR6 ), Pumpe, Modul mit drei Ventilen zum autmatischen Nullabgleich von CO2 (H2O manuell) und Anschlussmöglichkeit für einen CDM-A116 für zusätzliche Sensoren.
Das Design des Einlasses des Gasanalysators und das kleine Probenzellvolumen (5.9 ml) wird eine excellente Frequenzantwort (4.3 Hz Grenzfrequenz) sehr geringem Stromverbrauch des Systems (12 W) möglich. Außerdem reduziert der spezielle Einlass mit Wirbel (United States Patent No. 9,217,692) die Wartung und verbessert die Frequenzantwort gegenüber herkömmlichen Filtern.
Geringere Durchflussraten ermöglichen es, dass das CPEC310 sehr wenig Strom verbraucht (12 W). Campbell Scientific stellt alle Komponenten des CPEC310, inclusive Datenlogger und EasyFlux™ DL Software her und dadurch wird das gesamte System einfach und verlässlich.
Lesen Sie mehrFunktionen und Vorteile
- Erweiterbares high-end System mit CR6 Datenlogger und EasyFlux™ DL Software um Daten mit bis zu 20 Hz zu berechnen und zu korrigieren
- Das Modul mit drei Ventilen ermöglicht es dem CPEC310 als einziges closed-path Eddycovarianz System auf dem Markt, einen automatischen Nullabgleich für CO2/H2O zu machen.
- zusätzliche Anschlüsse für Energiebilanz- und Meteorologiesensoren
- Ideales System für hohe oder niedrige Türme
- Einfaches Design ermöglicht unkomplizierte Anwendung bei voller Funktionalität
- Neuartige Beschichtung schützt die Ultraschall-Transducer in korrosiver Umgebung
Bilder
Technische Beschreibung
The gas analyzer’s small sample cell volume (5.9 mL) minimizes the sample residence time (50 ms at the system’s nominal flow rate, 7 LPM). This gives excellent frequency response (5.8 Hz half-power bandwidth) with low total system power (12 W).
Eddy-Covariance Measurements
CO2 and H2O are measured with an EC155 Closed-Path Gas Analyzer. Three-dimensional wind speed and sonic air temperature are measured with a CSAT3A sonic anemometer head.
CPEC310 System Enclosure
The CPEC310 has two enclosures: a fiberglass enclosure that houses the CR6 datalogger, pump module, three-valve module, and optional CDM-A116, and the EC100 enclosure for data processing. The CPEC310 can also be equipped with a scrub module for automatic zeroing of the EC155.
CPEC310 Pump Module
The pump module, a standard component of the CPEC310 system, consists of a small dual-head diaphragm pump with a brushless dc motor mounted inside a fiberglass enclosure. An integral cable connects the pump module to the CPEC310 system enclosure, which provides power, temperature measurement and control, pressure measurement, and pumping speed measurement and control.
Spezifikationen
| Operating Temperature Range | -30° to +50°C |
| Input Voltage Range | 10.5 to 16.0 Vdc |
| Power |
|
System Enclosure |
|
| Dimensions | 54 x 44.5 x 29.7 cm (21.3 x 17.5 x 11.7 in.) |
| Weight |
|
Pump Module |
|
| Inlet Connection | 3/8-in. Swagelok |
| Pressure Sensor Range | 15 to 115 kPa |
| Pumping Speed | 3 to 9 LPM (automatically controlled at the set point, typically 7 LPM) |
| Cable Length | 3.0 m (10 ft) |
| Dimensions | 35.6 x 29.2 x 13.5 cm (14.0 x 11.5 x 5.3 in.) |
| Weight | 5.4 kg (11.8 lb) |
Three-Valve Module |
|
| Inlets for Module | Zero, CO2, and H2O span |
| Outlets | Analyzer and H2O bypass |
| Connections | ¼-in. Swagelok |
| Dimensions | 14.0 x 12.7 x 14.0 cm (5.5 x 5.0 x 5.5 in.) |
| Weight | 1.5 kg (3.3 lb) |
Scrub Module |
|
| Power |
|
| Cylinder Volume | 480 cm3 each (29.29 in.3 each) |
| Molecular Sieve Size | 1.6 to 2.5 mm beads (0.063 to 0.098 in. beads) |
| Enclosure Dimensions | 39.4 x 34.3 x 20.3 cm (15.5 x 13.5 x 8.0 in.) |
| Weight | 9.6 kg (21.1 lb) |
Dokumente
Broschüren Produkte
Handbücher
Technische Artikel
Realisierte Projekte
Übereinstimmung mit Richtlinien u. Vorschriften
Downloads
CR6 OS v.14.01 (8.56 MB) 26-09-2024
This download is for the CR6 datalogger. Execution of this download places the Operating System file(.obj) on your computer. It also updates the CRBasic Editor compiler and support files.
Why Update? UID (unique identifier) is now utilized for enhancing security along with other features and bug fixes. With this OS update it is recommended that you also update the Device Configuration Utility to the most recent version so that new datalogger features are available in the utility.
Note: Campbell Scientific always recommends updating operating systems on site if possible. When remote updates are required, it is recommended that you implement the necessary precautions to handle unexpected OS upload complications. All datalogger settings should be retained when updated remotely. If you choose to roll back to a previous operating system, the datalogger settings will be reset to default.
Watch the Video Tutorial: Sending an OS to a Local Datalogger.
EC100 OS v.8.02 (560 KB) 14-10-2019
EC100 Operating System.
Watch the Video Tutorial: Updating the EC100 Operating System.
ECMon v.1.6 (10.7 MB) 29-03-2016
EC100-Series Support Software.
Device Configuration Utility v.2.30 (46.9 MB) 02-10-2024
A software utility used to download operating systems and set up Campbell Scientific hardware. Also will update PakBus Graph and the Network Planner if they have been installed previously by another Campbell Scientific software package.
Supported Operating Systems:
Windows 11 or 10 (Both 32 and 64 bit)
EasyFlux DL for CR6CP v.1.08 (132 KB) 13-06-2024
CR6 datalogger program for Campbell closed-path eddy-covariance systems.
CSAT3H Heater Controller v.14.2 (46 KB) 02-02-2021
The CSAT3H Heater Controller ships with this encrypted program. This program is for the unlikely event that the program needs to be re-installed or updated to a newer version. Please contact Campbell Scientific if you have questions about the program or would like the algorithm modified for a specific application.
FAQs für
Number of FAQs related to CPEC310: 6
Alle anzeigenWenige anzeigen
-
No. A valve module is required to use the Scrub Module. Only the CPEC310 comes with a valve module.
-
The bottles of sieve for drop-in replacement contain the pellets and a membrane on top. The membrane is necessary to keep the pellets contained while allowing gas to pass over the zeolite. The bottle has the same footprint as the old magnesium perchlorate bottles. The amount in each bottle is listed on the bottle. The amount of sieve needed for each analyzer is the following:
- The EC150 needs 22 g (drop-in bottle).
- The IRGASON® needs 22 g (drop-in bottle).
- The EC155 needs 22 g (drop-in bottle).
- The AP200 needs 500 g (refill).
- The 27423 needs 1000 g (refill).
- The 31022 needs 500 g (refill).
-
The molecular sieve is a non-hazardous material that can be shipped to any country.
-
The molecular sieve has been demonstrated here by our engineering department to be effective at removing CO2 and H2O from the air sample. The change was made for two reasons:
- It was a safer alternative than using the previous chemicals.
- Increased shipping regulations for the chemicals limited the number of suppliers.
-
The molecular sieve is a direct replacement for the old magnesium perchlorate bottles. The molecular sieve may be used for any Campbell Scientific analyzer that used the old bottles.
-
Yes. For more information, refer to the "CPEC200 Scrub Module Installation, Operation and Maintenance" appendix in the CPEC200 Closed-Path Eddy-Covariance System Instruction Manual.