Masten / CM305
CM305 119 cm Mounting Pole with Cap

Überblick

Der CM305 ist ein 119 cm (47 in.) langer, 38.1 mm (1.5-in.) IPS Mast aus rostfreiem Stahl. Er ist gedacht zur Anbringung von Gehäusen, Sensoren oder anderen Instrumenten. Ideal kann man daran Sensoren anbringen, die etwas entfernt zur Hauptstation stehen sollen wie Regenkippwaagen oder Strahlungsbilanzsensoren. Der Mast kann einbetoniert werden oder auf einem Gestell montiert werden. Typischerweise wird er mit der CS700, der TB4 oder 385 verwendet.

Bilder

Labeled hole positions

Spezifikationen

Material Stainless-steel pipe 1.5 OD, IPS
Outer Diameter 4.8 cm (1.9 in.)
Pipe Size 3.81 cm (1.5 in.) IPS
Length 119 cm (47 in.)
Weight 6.4 kg (14 lb)

Short Leg Kit

Material Stainless-steel tubing 1.5 OD
Pipe Size 3.81 cm (1.5 in.) IPS
Leg Length 58 cm (23 in.)
Pedestal Height and Radius
  • Note: The pedestal height is foot/ground to bottom of mast vertical distance, and it is adjustable to the following:
  • 11 cm (4 in.) height and a 66 cm (26 in.) radius for Hole F
  • 22 cm (9 in.) height and a 63 cm (25 in.) radius for Hole E
  • 27 cm (11 in.) height and a 59 cm (23 in.) radius for Hole D
  • 33 cm (13 in.) height and a 55 cm (22 in.) radius for Hole C
  • 36 cm (14 in.) height and a 51 cm (20 in.) radius for Hole B
  • 41 cm (16 in.) height and a 46 cm (18 in.) radius for Hole A

Long Leg Kit

Material Stainless-steel tubing 1.5 OD
Pipe Size 3.81 cm (1.5 in.) IPS
Leg Length 99 cm (39 in.)
Pedestal Height and Radius
  • Note: The pedestal height is foot/ground to bottom of mast vertical distance, and it is adjustable to the following:
  • 20 cm (8 in.) height and a 105 cm (41 in.) radius for Hole F
  • 41 cm (16 in.) height and a 97 cm (38 in.) radius for Hole E
  • 50 cm (20 in.) height and a 91 cm (36 in.) radius for Hole D
  • 59 cm (23 in.) height and a 85 cm (34 in.) radius for Hole C
  • 66 cm (26 in.) height and a 77 cm (30 in.) radius for Hole B
  • 73 cm (29 in.) height and a 69 cm (27 in.) radius for Hole A

J-bolt Kit

J-bolt Material Stainless steel
J-bolt Size 1/2-13 in. x 12 in.

Kompatibel mit

Pedestal Kits

Three pedestal kits are offered as options for this mounting pole (see Ordering Info).

J-Bolt Kit

The J-Bolt Kit is for permanent installations. With this kit, customers can more easily control the pole‘s placement—ensuring that the pole remains in a vertical position. J-bolts are installed in a concrete foundation using the template provided with the kit. Leveling nuts allow adjustment of the pole’s position.

Short Leg Kit

This pedestal kit is adequate for many temporary installations and for many situations where it is impractical to use a concrete foundation. The short leg kit includes three 23” legs, three metal feet, and a pedestal base. The feet can be secured to the ground by using three 17049 Grounding Spikes (purchased separately).

Long Leg Kit

The long leg kit provides more stability for locations where the feet cannot be secured (e.g., pole sitting on a roof), for extended poles, or for areas that experience high wind speeds. This kit includes three 39” legs, three metal feet, and a pedestal base. The feet can be secured to the ground by using three 17049 Grounding Spikes (purchased separately).

Dokumente